NETGEAR CG3100Dv3 - Page 24

Content Filtering
24
NETGEAR Wireless Cable Gateway CG3100Dv3
To add a service:
1. Log in to the gateway as described in Logging
Into Your Gateway on page 9.
2. In the main menu, under Content Filtering, select
Services.
3. To disable a feature, clear its check box.
4. In order for you changes to take effect you must
click Apply.
The following Services are available in this screen:
• Firewall Features. The gateway performs Stateful
Packet Inspection (SPI) and protect against
Denial of Service (DoS) attacks.
• IPSec Pass-Through. IPSec traffic is forwarded. If
you clear this check box then this traffic will be
blocked.
• PPTP Pass-Through. PPTP traffic is forwarded. If
you clear this checkbox then this traffic will be
blocked.
• Multicast. The gateway can pass multicasting streams through the firewall.
• Port Scan Detection. When enabled, the gateway can respond to Internet-based port
scans.
• IP Flood Detection. Allows the is gateway to block malicious devices that are attempting
to flood devices.
• You can use the Web Features to set certain Web-oriented cookies, java scripts, and
pop-up windows to be blocked by the firewall.