48
A
A. Default Settings and Technical
Specifications
This chapter includes:
• Factory Default Settings
• Technical Specifications on page 49
Factory Default Settings
You can return the gateway to its factory settings. On the back panel of the gateway, press
and hold the Restore Factory Settings button for over 7 seconds. The gateway resets,
and returns to its factory settings.
Your device will return to the factory configuration settings
shown in the following table.
Factory Default Settings
Gateway Login User login URL http://192.168.1.1
User name and password (case
sensitive)
admin/password
Local Network
(LAN)
LAN IP 192.168.1.1
Subnet mask 255.255.255.0
DHCP server Enabled
DHCP starting IP address 192.168.1.2
DHCP Ending IP address 192.168.1.254
Firewall Inbound communication from the
Internet
Disabled (except traffic on port 80, the http port)
Outbound communication to the
Internet
Enabled (all)
Source MAC filtering Disabled
Internet
connection
WAN MAC address Use default hardware address
WAN MTU size 1500
To Next Page
Loading...
