Advanced Settings
37
NETGEAR Wireless Cable Gateway CG3100Dv3
To set up a DMZ host:
1. In the main menu, under Advanced, select DMZ Host.
2. If desired, select the Respond to Ping on WAN Port checkbox.
3. Type the last digit(s) of the IP address in the DMZ Address field.
4. Click Apply.
LAN IP Setup
The LAN IP screen allows you to configure LAN services such as the IP address of the
gateway and DHCP. The TCP/IP and DHCP default values work fine in most cases.
Note: If you disable the DHCP server, you will need to assign to your
computer a static IP address to reconnect to the gateway and
enable the DHCP server again.
To Next Page
Loading...
