NETGEAR CG3100Dv3 - Backing up and Restoring Your Settings

Managing Your Network
28
NETGEAR Wireless Cable Gateway CG3100Dv3
both upper and lower case letters, numbers, and symbols. Your passwords can be up to 30
characters.
To change the password:
1.
In the main menu, under Maintenance, select Set Password.
2. To change the password, enter the new password twice.
3. Click Apply to save your changes.
Note: After changing the password, you will be required to log in again to
continue the configuration. If you have backed up the gateway
settings previously, you should do a new backup so that the saved
settings file includes the new password.
Backing Up and Restoring Your Settings
The configuration settings of the gateway are stored in a configuration file in the gateway.
To save or restore the backup settings:
1. In the main menu, under Maintenance, select Backup Settings.
2. You can save the current configuration settings or restore saved settings:
• To save the current configuration settings, click Back Up.