NETGEAR CG3100Dv3 - Viewing the Event Log; Running the Diagnostic Ping Utility

Managing Your Network
29
NETGEAR Wireless Cable Gateway CG3100Dv3
• To restore the saved configuration settings from a backup file, click Browse, locate
and select the previously saved backup file. Then click Restore.
A message notifies you when the gateway has been restored to previous settings. Then, the
gateway restarts, which takes about one minute.
Note: When restoring configuration settings, do not interrupt the process
by going online, turning off the gateway, or shutting down the
computer.
Viewing the Event Log
The gateway logs security-related events such as denied incoming service requests and
hacker probes.
To see the event log:
1. In the main menu, under Maintenance, select Event Log.
2. To clear the log, click Clear Log; to refresh the log, click Refresh.
Running the Diagnostic Ping Utility
From the Diagnostics screen you can use Ping.