NETGEAR CG3700EMR-1CMNDS

Security
32
Wireless Cable Voice Gateway CG3700EMR-1CMNDS
4. To add a service, click the Add button.
The Block Services Setup screen displays:
5. From the Service Type list, select the application or service to block.
The list already displays several common services, but you are not limited to these
choices.
To add any additional services or applications that do not already display, select
User Defined.
6. If you select User Defined, select the protocol, and enter the name and the range of port
numbers of the service.
If you select a known service, these fields are filled in automatically.
If you know that the application uses either TCP or UDP, select the appropriate protocol. If
you are not sure, select TCP/UDP.
7. Enter a name for this service type in the Service
Type/User Defined field.
8. Enter the starting and ending port numbers. If the application uses a single port number
,
enter that number in both fields.
9. Enter the IP address of the computer that you want to block.
10. Click the Add button.
Your Block Services Setup selections are enabled.
Schedule Blocking
You can specify the days and time that you want to block Internet access.
 To schedule blocking:
1. Select ADV
ANCED > Security > Schedule.