Advanced Settings
51
Wireless Cable Voice Gateway CG3700EMR-1CMNDS
Wireless Card Access List
By default, any wireless computer or device that is configured with the correct SSID is
allowed access to your wireless network. For increased security, allow only specific wireless
computers and devices to access the wireless network based on their MAC addresses.
ļ To set up wireless card access:
1. Select ADV
ANCED > Advanced Setup > Wireless Features.
2. Click the Set Up
Access List button.
3. Select the Turn Access Control On check box.
If the Turn Access Control On check box is selected, and the access control list is blank,
then no wireless computers or devices can connect to your wireless network.
4. Click the Add button.
The Wireless Card Access List setup screen displays.
To Next Page
Loading...
Need help?
General