Configure the Computer to Work with
the Modem
Next, you configure the computer to interact with the modem.
USB Connection
Note: The modem must be connected to the Coaxial Cable and established link
(Cable and Status Lights are solid Green) before your PC will recognize the modem.
For the USB connection, you need to install USB drivers on your Windows computer.
1. If the computer was turned off, turn it on now.
2. Insert the CM212 GearBox CD in the computer’s CD-ROM drive.
3. Once the following dialog box appears click Next.
3
3
6
To Next Page
Loading...
Need help?
General
