NETGEAR CM400 User Manual

Manage and Monitor
18
CM400 High Speed Cable Modem
5. In the Cable Information pane, click the Reboot button.
A confirmation message displays.
6. Click the OK button.
The cable modem reboots.
Reset the Cable Modem to Factory Default Settings
To reset the cable modem to factory default settings, you can use either the Reset button on
the back panel of the cable modem or the Factory Reset software button. However, if you
changed the default password to access the cable modem and lost the password, you must
use the Reset button on the back panel.
After you reset the cable modem to factory default settings, the user name is admin, the
password is password. The LAN IP address is always 192.168.100.1. Y
ou cannot change
this LAN IP address.
Use the Reset Button on the Back Panel
CAUTION:
This process erases all settings that you configured in the cable modem.
 To reset the cable modem to factory default settings:
1. On the back of the cable modem, locate the Reset button.
Reset button
2. Using a straightened paper clip, press and hold the Reset button until the Upstream and
Downstream LEDs light amber.

NETGEAR CM400 Specifications

General

Modem speed	340000 Kbit/s
Flash memory	8 MB
Product color	Black
Internal memory	64 MB
Copper ethernet cabling technology	10BASE-T, 100BASE-TX, 1000BASE-T
DC-in jack	Yes
Ethernet LAN (RJ-45) ports	1
Browser supported	Microsoft Internet Explorer 5.0, Firefox 2.0, Safari 1.4, Google Chrome 11.0
Compatible operating systems	Microsoft Windows 7, 8, Vista, XP, 2000, Mac OS
Cables included	LAN (RJ-45)
Internal	No
Certification	CableLabs
Compatibility	DOCSIS 3.0 / DOCSIS 2.0
Power supply type	DC
Networking features	Gigabit Ethernet

Weight and Dimensions

Weight	190 g
Dimensions (WxDxH)	96 x 30 x 147 mm