NETGEAR D6220 Manual

10
3. On a Windows computer that is connected to the network, select
Start > Run, enter \\readyshare in the dialog box, and click the OK
button.
A window displays the files and folders on the device.
¾ To access the USB storage device from a Mac:
1. Connect your USB storage device to a USB port on the modem router.
2. If your USB storage device uses a power supply, connect it.
You must use the power supply when you connect the USB storage
device to the modem router.
When you connect the USB storage device to the modem router’s USB
port, it might take up to two minutes before it is ready for sharing. By
default, the USB storage device is available to all computers on your
local area network (LAN).
3. On a Mac that is connected to the network, launch Finder and select
Go > Connect to Server.
The Connect to server window opens.
4. Enter the smb://readyshare in the Server Address field and click
the Connect button.
5. When prompted, select the Guest radio button.
6. If you set up access control on the modem router and you allowed
your Mac to access the network, select the Registered User

NETGEAR D6220 Specifications

General

DSL WAN	-
Ethernet WAN	Yes
SIM card slot	No
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	900 Mbit/s
Product type	Tabletop router
Product color	Black
Security algorithms	WPA, WPA2, WPA2-PSK
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11ac
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	5
Power source type	AC
Routing protocols	IP
Antennas quantity	2
Cables included	LAN (RJ-45), Phone (RJ-11)

Weight and Dimensions

Depth	182 mm
Width	240 mm
Height	41 mm
Weight	341 g