NETGEAR D6220 Manual

12
The ReadySHARE Vault dashboard displays.
4. Use the dashboard or the Backup tab to set up and run your backup jobs.
Share a USB Printer
You can connect a USB printer to a USB port on the modem router and
print wirelessly.
¾ To set up ReadySHARE Printer:
1. Connect the USB printer to a USB port on the modem router with a
USB printer cable.
2. On each computer that will share the printer, do the following:
a. Install the current USB printer driver software (available from the
printer manufacturer).
b. Download the NETGEAR USB Control Center utility from
netgear.com/readyshare and install it.
c. Select the language.
3. If prompted, select the printer and click the Connect button for each
computer.
When the first computer connects, the status changes to Manually
connected by xxx.
For each computer, when you complete Step 3, the printer status
displays as Available.

NETGEAR D6220 Specifications

General

DSL WAN	-
Ethernet WAN	Yes
SIM card slot	No
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	900 Mbit/s
Product type	Tabletop router
Product color	Black
Security algorithms	WPA, WPA2, WPA2-PSK
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11ac
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	5
Power source type	AC
Routing protocols	IP
Antennas quantity	2
Cables included	LAN (RJ-45), Phone (RJ-11)

Weight and Dimensions

Depth	182 mm
Width	240 mm
Height	41 mm
Weight	341 g