NETGEAR D6400 Quick Start Guide

12
Share USB Devices on the Network
ReadySHARE lets you access and share USB devices connected to
the modem router. (If your storage device uses special drivers, it is
not compatible.)
¾ To access the USB device from a Windows computer:
1. Connect a USB device to a USB port on the modem router.
If your USB device uses a power supply, you must use it when
you connect the device to the modem router.
When you connect the USB device to the modem router’s port,
it might take up to two minutes before it is ready for sharing.
By default, the device is available to all computers on your local
area network (LAN).
2. Select Start > Run.
3. Enter \\readyshare in the dialog box.
4. Click the OK button.
A screen automatically opens and displays the files and folders
on the device.

NETGEAR D6400 Specifications

General

Product type	Tabletop router
Product color	Black
Ethernet WAN	Yes
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	1600 Mbit/s
WLAN data transfer rate (first band)	300 Mbit/s
WLAN data transfer rate (second band)	1300 Mbit/s
Networking standards	IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
3G	No
USB 2.0 ports quantity	2
Ethernet LAN (RJ-45) ports	5
Security algorithms	WPA, WPA-PSK, WPA2, WPA2-PSK
Cables included	LAN (RJ-45)
Power source type	AC
Supported network protocols	IPv6
Internal memory	128 MB

Weight and Dimensions

Depth	198.5 mm
Width	191 mm
Height	65 mm
Weight	422 g