13
¾ To access the USB device from a Mac:
1. Connect a USB device to a USB port on the modem router.
If your USB device uses a power supply, you must use it when
you connect the device to the modem router.
When you connect the USB device to the modem router’s port,
it might take up to two minutes before it is ready for sharing.
By default, the device is available to all computers on your local
area network (LAN).
2. On a Mac that is connected to the network, launch Finder and
select Go > Connect to Server.
The Connect to Server screen displays.
3. Enter the smb://readyshare in the Server Address field.
4. Click the Connect button.
5. When prompted, select the Guest radio button.
If you set up access control on the modem router and you
allowed your Mac to access the network, select the Registered
User radio button and enter admin for the name and
password for the password. For more information about access
control, see the user manual, which is available online at
http://downloadcenter.netgear.com or through a link in the
modem router’s user interface.
6. Click the Connect button.
A screen automatically opens and displays the files and folders
on the device.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
