What to do if I cannot load an Internet web page using my NETGEAR DGN1000 Wireless Router?
If you cannot load an Internet web page using your NETGEAR Wireless Router, it might be because your computer doesn't recognize any DNS server addresses, or your computer might not have the wireless modem router configured as its TCP/IP wireless modem router.
How to troubleshoot login issues on a NETGEAR Wireless Router?
If you cannot log in to your NETGEAR Wireless Router, ensure that the router is plugged in and powered on and that you are using the correct login information. If you're unable to connect wirelessly, try using an Ethernet connection to view the router's wireless settings. Also, check the Ethernet connection between your computer and the router.
What to do if the DSL Link LED is off on my NETGEAR DGN1000?
If the DSL Link LED on your NETGEAR Wireless Router is off, check that the telephone company has established the connection to your line and tested it. Also, verify that you are connected to the correct telephone line.
What to do if TCP/IP network is not responding on NETGEAR DGN1000?
If your TCP/IP network is not responding when using your NETGEAR Wireless Router, ensure the LAN port LED is lit. Verify that the Ethernet card driver software and TCP/IP software are installed and configured on your PC or workstation. Also, check that the IP address for your router and workstation are correct and on the same subnet.
General| Wireless Standard | 802.11b/g/n |
|---|---|
| Frequency Band | 2.4 GHz |
| Wireless Speed | Up to 150 Mbps |
| LAN Ports | 4 x 10/100 Mbps |
| WAN Port | 1 x ADSL2+ |
| Security | WEP, WPA, WPA2 |
| Firewall | SPI, NAT |
| Antenna | Internal |
| Weight | 0.6 lbs |
To Next Page
