Advanced Settings
118
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2
Remote Management
The remote management feature lets you upgrade or check the status of your N600 Modem
Router over the Internet.
To set up remote management:
1. Select Advanced >
Advanced Setup > Remote Management.
Note: Be sure to change the wireless modem router’s default login password
to a very secure password. The ideal password should contain no
dictionary words from any language and contain uppercase and
lowercase letters, numbers, and symbols. It can be up to 30
characters.
2. Select the T
urn Remote Management On check box.
3. Under
Allow Remote Access By, specify the external IP addresses to be allowed to access
the wireless modem router’s remote management.
Note: For enhanced security, restrict access to as few external IP addresses
as practical.
• T
o allow access from a single IP address on the Internet, select Only This
Computer. Enter the IP address that will be allowed access.
• T
o allow access from a range of IP addresses on the Internet, select IP Address
Range. Enter a beginning and ending IP address to define the allowed range.
• T
o allow access from any IP address on the Internet, select Everyone.
4. Specify the port number for accessing the management interface.
To Next Page
Loading...
Need help?
General
