NETGEAR DGND3700v2 User Manual

71
6
6. USB Printer Control
Access and configure a USB printer
This chapter describes how to access and configure a USB printer attached to your wireless
modem router.
The USB Control Center utility allows you to control a shared USB device from your computer
that is connected to the USB port on your router. The utility allows you to control a printer.
The utility has to be installed on each computer on your network from which you want to control
the device. You can download this utility at www.netgear.com/landing/en-us/readyshare.aspx.

NETGEAR DGND3700v2 Specifications

General

Model	DGND3700v2
Type	Wireless Router
Wireless Standard	802.11 a/b/g/n
Frequency Band	2.4 GHz / 5 GHz
Ethernet Ports	4 x 10/100/1000 Mbps
USB Ports	2 x USB 2.0
Antenna	Internal
Security	WEP, WPA, WPA2
Firewall	SPI, NAT
VPN Support	VPN pass-through
Dimensions	223 x 153 x 31 mm
Weight	0.5 kg
Wireless Speed	300 + 300 Mbps
WAN Ports	1 x ADSL2+