Security
78
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2
The Firewall Rules screen lists all firewall rules that have been changed from their default
setting. The default rules allow all outgoing traffic and block all incoming traffic.
• To change the firewall rules for outbound traffic, you need to add it from the Outbound
Services screen as described in Step 2.
• T
o change the firewall rules for inbound traffic, you need to add it from the Port
Forwarding/Port Triggering screen as described in Port Forwarding and Triggering on
page 105.
The Outbound Services and Port Forwarding/Inbound Services screens list the available
services you can allow or block.
You can also define your own custom services to allow or
block with the Add Service screen as described in Add Custom Services to Allow or Block
on page 80. Once you add your own custom services, they are available on the Outbound
Services and Port Forwarding/Inbound Services screens.
You can also specify whether these services are always allowed or blocked, or allowed or
blocked per schedule a
s described in Schedule for Firewall Rules on page 81.
2. Outbound Services. To allow or block an outbound service, click Add to display the
following screen:
Use the Outbound Services screen to define a new Outbound Firewall rule, or edit an
existing rule. The outbound firewall rules are used to block or allow access by computers
on your network to services or applications on the Internet.
a. Service. Select the service or application to be covered by this rule. If the service or
application you want does not appear in the list, you have to define it as described in
Add Custom Services to Allow or Block on page 80.
b. Action. Select the action you want for traf
fic covered by this rule:
• BLOCK always.
Always block the traffic covered by this rule.
To Next Page
Loading...
