NETGEAR DST6501 User Manual

7
2. If the Power LED does not light, slide the Power On/O switch to
the On position.
3. Update the encryption key to secure the connection between the
DST adapter and the DST router:
a. Press the WPS and DST Adapter Sync button on the
DST router.
b. Within two minutes, press the WPS and DST Router Sync
button on the DST adapter for two seconds.
The Power LED on the DST adapter blinks and the DST LED on
the DST router blinks.
Once the connection is made, the DST LED on the DST adapter
lights solid green or amber and the DST LED on the DST router
lights solid blue.
This process takes between 5 and 80 seconds.
If the DST LED on the DST adapter is red, the link performance
is weak. You might want to move the DST adapter to another
electrical outlet with a faster connection.

NETGEAR DST6501 Specifications

General

Brand	NETGEAR
Model	DST6501
Category	Adapter
Language	English