To use WPA + WPA2 security, in the Enter Password (8-63 characters) field,
enter a phrase of 8 to 63 characters. Enter the password again in the Verify
Password field. To join the 2.4 GHz or 5 GHz guest WiFi network, a user must
enter this password.
8. Click the SAVE button.
Your settings are saved.
Use WPS to add a computer to the
extender’s WiFi network
WPS (WiFi Protected Setup) lets you connect a computer or WiFi device to the extender’s
network without entering the WiFi network passphrase or key. Instead, you use a WPS
button or enter a PIN to connect.
If you use the push button method, the WiFi device that you are trying to connect must
include a physical button or a software button. If you use the PIN method, you must
know the PIN of the WiFi device that you are trying to connect.
WPS supports WPA and WPA2 WiFi security. If your extender network is open (no WiFi
security is set), connecting with WPS automatically sets WPA + WPA2 WiFi security on
the extender network and generates a random passphrase. You can view this passphrase
on the WiFi Settings page (for more information, see View WiFi settings on page 29).
Use WPS with the push button method
For you to use the push button method to connect a WiFi device to the extender’s WiFi
network, the WiFi device that you are trying to connect must include a physical WPS
button or an onscreen WPS button that you can click.
To use WPS to add a WPS-enabled device to the extender’s WiFi network:
1.
Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
•
If you did not enable the One WiFi Name feature, enter
http://www.mywifiext.net/ in the address field of the browser.
User Manual36Extender Network Settings
AX1800 4-Stream WiFi 6 Mesh Extender
To Next Page
Loading...
Need help?
General
Weight and Dimensions
