NETGEAR EN104TP EN104TP EN104TP User Manual

Welcome message and purpose of the EN104TP, EN106TP, and EN108TP Ethernet-Hubs.

Details the features of the EN100TP series hubs, including port count, LEDs, uplink, and plug-and-play.

Lists the items included in the package: hub model, wall mount kit, manual, warranty, power adapter, and support card.

Illustrations of the front panels of the EN104TP, EN106TP, and EN108TP hub models.

Description of the RJ-45 ports and their integrated LEDs (Link and Rx) on the hub front panel.

Explanation of the functions for Power (Pwr), Collision (Col), Link, and Rx LEDs.

Explains the function of the Normal/Uplink switch for direct PC connection or cascading.

Describes the grounding lug and power adapter socket on the rear of the hub.

Details environmental requirements for temperature, humidity, ventilation, and spacing.

Instructions for placing the hub on a surface or mounting it on a wall.

How to connect PCs, workstations, and other devices using RJ-45 ports and UTP cables.

Note on the 100-meter limit for Ethernet cable length between devices and the hub.

Explanation of cascading hubs using 10BASE-T ports and UTP cable segments.

Table showing required cables (1:1 or Crossover) for connecting to different devices.

Guide to setting the Normal/Uplink switch for connecting to PCs, servers, routers, or other hubs.

Illustrates cascading hubs in a star topology and shows the Normal/Uplink switch settings.

Note on the limit of five hubs in a twisted-pair connection path for Ethernet specifications.

Checks the status of the Power (Pwr) and Link LEDs after connecting the hub to power.

Table listing symptoms (LED status), causes, and solutions for common hub problems.

Ensures PC network cards are operational and drivers are installed.

Guidance on resetting the hub and contacting support if issues persist.

Provides order numbers for replacement power adapters for EN104TP, EN106TP, and EN108TP models.

Details supported protocols, data rates, interfaces, power consumption, and dimensions.

Specifies temperature and humidity requirements for the hub's operation.

Lists electromagnetic standards compliance, certifications, and warranty periods for the hub and adapter.

Lists trademarks and notes copyright and disclaimer for product changes.

NETGEAR disclaims liability for damages resulting from product use or misuse.

Confirms the hub models are certified according to German regulations for interference suppression.

Statement regarding compliance with Voluntary Control Council for Interference standards for IT equipment.

Class A device warning about potential interference in residential areas and user responsibility.

Compliance with Council Directive 89/336/EEC for EMC protection against radio interference.

Confirms digital device compliance with Class A radio interference limits set by Canadian authorities.