Basic Wireless Configuration and Security
4
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Configure the Country of Operation
The region of operation is nonconfigurable; it is set for the region in which you purchased the
wireless VPN firewall. The selection of the country is limited to the countries in the region in
which you purchased the wireless VPN firewall.
To configure the country settings:
1. Select Network Configuration > Wireless Settings > Radio Settings. The Radio
Settings screen displays:
Figure 1.
2. Specify the country by making a selection from the Country drop-down list.
3. Click Apply to save your settings. The wireless VPN firewall reboots.
Note: Other wireless settings that you can configure on the Radio Settings
screen are explained in the “Configure the Basic Radio Settings”
section in Chapter 4, “Wireless Configuration and Security,” of the
Reference Manual.
To Next Page
Loading...
Need help?
General