Need help?Do you have a question about the NETGEAR M4300-52G and is the answer not in the manual?
General| Switch type | Managed |
|---|---|
| Switch layer | L3 |
| Stackable | Yes |
| Form factor | 1U |
| Product color | Black |
| Console port | RS-232 |
| SFP+ module slots quantity | 2 |
| Installed SFP+ modules quantity | 0 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Basic switching RJ-45 Ethernet ports quantity | 48 |
| Output power | 150 W |
| Power consumption (max) | 47.4 W |
| Number of power supply units | 1 |
| Number of VLANs | 4000 |
| Networking standards | - |
| MAC address table | 16000 entries |
| Packet buffer memory | 16 MB |
| Memory type | RAM |
| Noise level | 31.5 dB |
| Flash memory | 256 MB |
| Internal memory | 1024 MB |
| Processor frequency | 800 MHz |
| DHCP features | DHCP server |
| Security algorithms | 802.1x RADIUS, HTTPS, SNMP |
Weight and Dimensions| Weight | 4910 g |
|---|
Details key hardware capabilities and specifications of NETGEAR M4300 switches.
Outlines essential safety guidelines for handling and operating NETGEAR M4300 switches.
Describes hardware components of M4300 full 10G switch models.
Details hardware features of M4300 1G models with 10G uplinks.
Provides safety measures to prevent damage from electrostatic discharge (ESD).
Covers procedures for installing the switch in a rack or on a flat surface.
Lists common symptoms, causes, and solutions for troubleshooting NETGEAR M4300 switches.
To Next Page