Need help?Do you have a question about the NETGEAR M4350 Series and is the answer not in the manual?
General| Model | M4350 Series |
|---|---|
| Layer | Layer 3 |
| Stackable | Yes |
| AC Power Supply | Yes |
| Security Features | ACLs, 802.1X, RADIUS, SSH, SSL |
Provides a general description of the NETGEAR Fully Managed Switches M4350 Series and their high-speed capabilities.
Lists the main hardware features supported by the M4350 Series switches, including port configurations and PoE capabilities.
Explains how switches can be controlled and managed as a single stack, defining management and member switches.
Outlines essential safety guidelines to prevent damage and ensure personal safety when operating the equipment.
Describes the hardware features, front panel, and back panel components of the M4350-8X8F model.
Details the hardware specifications, front and back panels, and LEDs for the M4350-24G4XF switch model.
Provides an overview of the M4350-48G4XF model, including its front and back panel components and port configurations.
Explains common hardware interfaces such as Gigabit RJ-45 copper ports and fiber transceiver ports.
Details the PoE port capacities and the switch's total PoE power budgets, including expansion options.
Information on optional auxiliary power supplies (APSs) that can be installed to increase the switch's power capacity.
Covers essential site requirements for installing the switch, including mounting, access, power, and environment.
Provides instructions for unpacking the switch, distinguishing between full-width and half-width models.
Details procedures for mounting the switch in a rack or placing it on a flat surface, including flush and set-back mounting.
Guides users on how to connect network devices to the switch's RJ-45 Ethernet ports using appropriate cables.
Outlines the steps to apply AC power to the switch and verify its operation by checking the status LEDs.
A table listing common symptoms, their potential causes, and recommended solutions for troubleshooting.
Provides specific tips and solutions for addressing problems related to Power over Ethernet (PoE) functionality.
Offers further suggestions for resolving issues, including network adapter checks, configuration, and switch integrity.
To Next Page