Table 3. LEDs of model M4350-24G4XF (Continued)
DescriptionLED
Off: No SFP module link is established on the fiber port.
Solid green: The fiber port established a 10G link.
Blinking green: The fiber port is transmitting or receiving packets at 10G.
Solid yellow: The fiber port established a 1G link.
Blinking yellow: The fiber port is transmitting or receiving packets at 1G.
Port LEDs for SFP+ ports
numbered 25 through 28
Port LEDs, Back Panel
Left LED, speed status:
Solid green: The port established a 1G link.
Solid yellow: The port established a 100M link.
Off: No link is established on the port.
OOB Ethernet port LEDs
Right LED, activity and link status:
Solid green: The port established a link.
Blinking green: The port is transmitting or receiving packets.
Off: No link is established on the port.
Model M4350-48G4XF (SKU GSM4352)
This section describes the switch hardware features for model M4350-48G4XF (SKU
GSM4328).
This full-width model provides a switching fabric of 176 Gbps and supports the following
port configurations:
•
Forty-eight PoE+ (802.3at) Gigabit Ethernet RJ-45 ports that support 1 Gbps and
100 Mbps
•
Four SFP+ fiber uplink ports that support 10 Gbps or 1 Gbps transceiver modules
The total PoE budget for this model is 236W, optionally expandable to up to 1440W.
Front panel model M4350-48G4XF
Figure 7. Front panel model M4350-48G4XF
Hardware Installation Guide22Hardware Overview
Fully Managed Switches M4350 Series
To Next Page
Loading...
Need help?
General