Need help?Do you have a question about the NETGEAR M4250 Series and is the answer not in the manual?
General| Series | M4250 |
|---|---|
| Category | Switch |
| Managed | Yes |
| Quality of Service (QoS) | Yes |
| VLAN Support | Yes |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Humidity | 10% to 90% non-condensing |
| Ports | Varies by model (8, 12, 24, 48 ports) |
| Port Type | Gigabit Ethernet |
| Switching Capacity | Varies by model |
| Layer | Layer 2/3 |
| Management | Web GUI, CLI, SNMP |
| Mounting | Rackmount and Desktop |
| Forwarding Rate | Varies by model |
| AC Power Supply | Internal |
| Fanless Option | Yes, on some models |
| Security Features | 802.1x, ACLs |
| Stacking | Yes |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 70°C |
| PoE | Yes (on select models) |
Lists M4250 switch models with their port configurations and PoE capabilities.
Step-by-step guide on accessing the switch's AV UI via a web browser.
Instructions for logging into the AV UI using the switch's default IP address.
Guide on logging into the AV UI when the switch has a known IP address.
Detailed steps for creating custom AV profile templates with specific settings.
Comprehensive guide for updating the switch's firmware through the AV UI.
Procedure to revert the switch to its original factory default configuration.
To Next Page
