NETGEAR M4250 Series User Manual

Overview of preconfigured AV profile
templates
An AV profile template integrates NETGEAR proprietary settings, allowing you to
optimize specific audio and video environments. You can use an AV profile template
to create one or multiple network profiles. For example, you could use the same AV
profile template to set up three network profiles based on a location within a building:
one network profile for the lobby, one for the theater, and one for the patio.
The switch provides the following preconfigured AV profile templates:
•
Audio Dante. Use this template to connect the switch to Dante audio devices and
their controller.
•
Data. Use this template to connect the switch to streaming ACN (sACN), Art-Net,
mobile ad hoc network (MANET), and other network devices as well as to computers.
•
Audio Q-SYS. Use this template to connect the switch to Q-SYS audio devices and
their controller.
•
Video with Q-SYS audio. Use this template to connect the switch to IP video
encoders for transmitting video, IP video decoders for receiving video, and a
controller for these devices when Q-SYS audio is supported in the same VLAN.
This template can support devices such as Crestron DM NVX systems, AMX SVSI
products, Aurora Multimedia products, Atlona products, Dante video products, and
products that comply with standardization by the SDVoE Alliance.
•
Video with AES67 audio. Use this template to connect the switch to IP video
encoders for transmitting video, IP video decoders for receiving video, and a
controller for these devices when AES67 audio is supported in the same VLAN.
This template can support devices such as Crestron DM NVX systems, AMX SVSI
products, Aurora Multimedia products, Atlona products, Dante video products, and
products that comply with standardization by the SDVoE Alliance.
•
Audio-over-IP AVB. Use this template to connect the switch to Audio Video Bridging
(AVB) devices.
•
Video. Use this template to connect the switch to IP video encoders for transmitting
video, IP video decoders for receiving video, and a controller for these devices when
audio is sent and received from the video nodes using another VLAN ID.
This template can support devices such as Crestron DM NVX systems, AMX SVSI
products, Aurora Multimedia products, Atlona products, Dante video products, and
products that comply with standardization by the SDVoE Alliance.
•
Audio-over-IP AES67. Use this template to connect the switch to AES67 audio
devices and their controller.
Audio Video User Manual10Manage Audio-Video Profile
Templates and Network Profiles
AV Line of Fully Managed Switches M4250 Series

NETGEAR M4250 Series Specifications

General

Series	M4250
Category	Switch
Managed	Yes
Quality of Service (QoS)	Yes
VLAN Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Humidity	10% to 90% non-condensing
Ports	Varies by model (8, 12, 24, 48 ports)
Port Type	Gigabit Ethernet
Switching Capacity	Varies by model
Layer	Layer 2/3
Management	Web GUI, CLI, SNMP
Mounting	Rackmount and Desktop
Forwarding Rate	Varies by model
AC Power Supply	Internal
Fanless Option	Yes, on some models
Security Features	802.1x, ACLs
Stacking	Yes
Operating Temperature	0°C to 50°C
Storage Temperature	-20°C to 70°C
PoE	Yes (on select models)