NETGEAR M4250 Series Configuration

Netgear NMS-NG26GPX-AVB (M4250-26G4XF-PoE+)
switch configuration
This article provides an overview of the Netgear M4250-26G4XF-PoE+ switch as sold under Biamp part number NMS-
NG10GPX-AVB.
Intended use and support
The switch supports AVB installations that include Tesira, Control, and Qt X products. The primary out-of-box
functionality focuses on AVB with Dante supported. The switch uses a default VLAN to support AVB devices and can
add additional profiles for a larger Dante, AVB, and Control design.
Specification: This specification outlines the features of the switch, default configuration, and sample topologies.
Netgear Support: Netgear offers design support through their Pro AV Design Services group. Biamp recommends
contacting them at ProAVDesign@netgear.com for network design support on any topologies that are not listed as
tested by Biamp or that require mixing M4250 switch models within a design.
Default Configuration File: Biamp Default NMS-NG10GPX-AVB
Overview
The Netgear M4250 AV Line of switches provides a range of configurations supporting multiple audio and video
Ethernet protocols, including AVB, Dante, and AES67. In addition to a wide variety of industry-standard networking
features, this line of switches includes specific features tailored to the AV industry.
Copyright 2013-2020 Biamp Systems http://support.biamp.com/
1

NETGEAR M4250 Series Specifications

General

Series	M4250
Category	Switch
Managed	Yes
Quality of Service (QoS)	Yes
VLAN Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Humidity	10% to 90% non-condensing
Ports	Varies by model (8, 12, 24, 48 ports)
Port Type	Gigabit Ethernet
Switching Capacity	Varies by model
Layer	Layer 2/3
Management	Web GUI, CLI, SNMP
Mounting	Rackmount and Desktop
Forwarding Rate	Varies by model
AC Power Supply	Internal
Fanless Option	Yes, on some models
Security Features	802.1x, ACLs
Stacking	Yes
Operating Temperature	0°C to 50°C
Storage Temperature	-20°C to 70°C
PoE	Yes (on select models)