NETGEAR M4250 Series

Netgear-approved Gigabit SFP modules are recommended when using this topology.
• M4250_SFP.pdf
Further reading
• Connecting to the M4250
• Enabling AVB Using the AV User Interface
• Enabling AVB Using the Main User Interface
• Enabling AVB Using the Command Line Interface (CLI)
• Useful CLI Commands
Netgear resources
• Installation Guide
• Hardware Installation Guide
• User Manual
• Audio Video User Manual
• Software Administration Manual
• Command Line Interface (CLI) Manual
Copyright 2013-2020 Biamp Systems http://support.biamp.com/
10