Need help?Do you have a question about the NETGEAR M4250-40G8F-PoE+ and is the answer not in the manual?
General| Product Type | Managed Switch |
|---|---|
| PoE Support | Yes |
| PoE Budget | 480W |
| Forwarding Rate | 952 Mpps |
| MAC Address Table Size | 32K |
| VLAN Support | Yes |
| Layer | L2/L3 |
| Rack Mountable | Yes |
| Power Supply | Internal |
| Jumbo Frame Support | Yes |
| Management | Web, CLI, SNMP |
| Operating Temperature | 0 to 50 °C |
| Storage Temperature | -40 to 70 °C |
| Humidity | 90% maximum relative humidity, noncondensing |
| Form Factor | Rackmount |
| Ports | 40 |
Steps to log in to the AV UI via the management interface's default IP address.
Procedure for accessing the AV UI through the Out-of-Band (OOB) port.
Guide on creating network profiles using preconfigured or custom AV profile templates.
Details on managing PoE interface capacities, budgets, and prioritization.
How to manually enable or disable switch ports and LAG interfaces.
Enable or disable 802.1X port authentication globally via RADIUS server.
Information about RADIUS servers for network security and authentication.
Steps to configure essential settings for a RADIUS server.
Details on configuring the IP address for the switch's management interface.
Steps to assign a static IP address to the management interface.
To Next Page
