NETGEAR M4250 Series Configuration

QoS: From QoS -> CoS configuration, verify the Global trust mode is set to “trust dot1p”
Supported Topologies
One of the benefits of the Netgear M4250 line is the ability to scale up the design topology to fit a larger deployment.
This is done via the Auto-trunk feature. In the default configuration auto-trunk has been enabled to allow for the single
switch to join additional switches in a daisy chain or star topology to grow with system needs.
Copyright 2013-2020 Biamp Systems http://support.biamp.com/
9

NETGEAR M4250 Series Specifications

General

Series	M4250
Category	Switch
Managed	Yes
Quality of Service (QoS)	Yes
VLAN Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Humidity	10% to 90% non-condensing
Ports	Varies by model (8, 12, 24, 48 ports)
Port Type	Gigabit Ethernet
Switching Capacity	Varies by model
Layer	Layer 2/3
Management	Web GUI, CLI, SNMP
Mounting	Rackmount and Desktop
Forwarding Rate	Varies by model
AC Power Supply	Internal
Fanless Option	Yes, on some models
Security Features	802.1x, ACLs
Stacking	Yes
Operating Temperature	0°C to 50°C
Storage Temperature	-20°C to 70°C
PoE	Yes (on select models)