NETGEAR M4250 Series Configuration

MRP Setting: From the Switching -> MRP tab. verify the MRP configuration Shows MVRP, MMRP, and MSRP modes
as enabled. Max fan in ports set to a default value of 0.
MRP Timers: From the Advanced->MRP Port Settings, verify Join, Leave, and Leave All timers are at Biamp settings.
Join 20, Leave 500, and Leave All 2500
Note: Default MSRP Leave Timer updated to 500cs / 5000ms to improve compatibility for large AVB networks.
Copyright 2013-2020 Biamp Systems http://support.biamp.com/
8

NETGEAR M4250 Series Specifications

General

Series	M4250
Category	Switch
Managed	Yes
Quality of Service (QoS)	Yes
VLAN Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Humidity	10% to 90% non-condensing
Ports	Varies by model (8, 12, 24, 48 ports)
Port Type	Gigabit Ethernet
Switching Capacity	Varies by model
Layer	Layer 2/3
Management	Web GUI, CLI, SNMP
Mounting	Rackmount and Desktop
Forwarding Rate	Varies by model
AC Power Supply	Internal
Fanless Option	Yes, on some models
Security Features	802.1x, ACLs
Stacking	Yes
Operating Temperature	0°C to 50°C
Storage Temperature	-20°C to 70°C
PoE	Yes (on select models)