Need help?Do you have a question about the NETGEAR M5300 Series and is the answer not in the manual?
General| Model | M5300 Series |
|---|---|
| Stackable | Yes |
| Form Factor | Rack-mountable |
| Layer | Layer 2/3 |
| Power over Ethernet (PoE) | Available on some models |
| VLAN Support | Yes |
| Jumbo Frame Support | Yes |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 70°C |
Describes the front panels of the M5300 Series switches, including LEDs, buttons, and ports.
Details the rear panel components like console ports, USB ports, and IO module bays.
Lists package items and provides instructions for preventing static damage.
Steps for safely unpacking hardware and preparing the installation site.
Guides for physically installing the switch, connecting power, and checking LEDs.
How to install SFP/SFP+ modules and configure switch stacking.
Procedures for managing power modules and connecting a redundant power supply.
Instructions for connecting network devices via RJ-45 and setting up console access.
A table listing common problems, causes, and solutions for switch operation.
Additional suggestions for resolving network issues and switch integrity.
Details IEEE protocols, Layer 2 services, and general compatibility for M5300 series.
Covers switch management features, Quality of Service, and security functions.
Details performance metrics, interface types, and stacking capabilities per model.
Covers bandwidth, environment specs, Layer 3 services, heat, noise, and power for models.
Provides Mean Time Between Failure (MTBF) and weight data for M5300 switch models.
Default settings for port speed, duplex, flow control, and Gigabit port type.
Default settings for management IP, password, web access, Java, VLAN, and STP.
Default settings for network services, protocols, and security features like 802.1x.
Includes manufacturer, VCCI, FCC, and Canadian DoC compliance notices.
Declarations of conformance and statements regarding EU radio interference regulations.
To Next Page
