NETGEAR M5300 Series - Performance, Interface, and Stacking Specifications

Technical Specifications
26
NETGEAR Managed Stackable Switch M5300 Series
System Service • DHCP, BOOTP Relay
• DHCP Server
Stacking • Maximum of 8 switches in a single stack
• RING Topology support
• CHAIN Topology support
Addressing 48-Bit MAC address
MAC Address entries 32K MAC addresses per system
Performance • Forwarding Modes: Store-and-Forward
• Network latency:
- 3.782 μs for 64-byte frames for 1000 Mbps to 1000 Mbps transmission
- 8.415 μs for 64-byte frames for 10G to 10G transmission
Interface M5300-28G/M5300-28G3/M5300-28G-PoE+
• 24 RJ-45 port for 10/100/1000M
• 24 PoE+ port (M5300-28G-PoE+ only)
• 4 SFP/RJ45 combo port for 100M/1000M
• 2 SFP+/RJ45 combo port for 1G/10G
• 1 power module slot
• 2 IO module bays
• 1 USB host port
• 1 DB9 console port
• 1 mini-USB console port
M5300-52G/M5300-52G3/M5300-52G-PoE+
• 48 RJ-45 port for 10/100/1000M
• 48 PoE+ port (M5300-52G-PoE+ only)
• 4 SFP/RJ45 combo port for 100M/1000M
• 2 SFP+/RJ45 combo port for 1G/10G
• 1 power module slot
• 2 IO module bays
• 1 USB host port
• 1 DB9 console port
• 1 mini-USB console port
M5300-28GF3
• 24 SFP port for 10/100/1000M
• 4 SFP/RJ45 combo port for 100M/1000M
• 2 SFP+/RJ45 combo port for 1G/10G
• 1 power module slot
• 2 IO module bays
• 1 USB host port
• 1 DB9 console port
• 1 mini-USB console port
Table 4. M5300 Series technical specifications (continued)