NETGEAR M5300 Series User Manual

10
2
2. Hardware Installation
This chapter explains how to install the hardware for the Managed Stackable Switch M5300
Series.
Package Contents
Each switch is packed and shipped separately. The package contains the following items:
• Managed stackable switch with preinstalled software
• Power cord
• USB console cable
• Rubber footpads for tabletop installation
• Rubber caps for the SFP / SFP+ sockets
• Rack-mounting kit
• USB console cable with one mini-B connector and one type A connector
• Resource CD: The CD either includes these documents or links to access them:
- Managed Switch CLI Manual, Version 10.0
- Managed Switch Administration Guide
- Managed Switch Installation Guide
- This hardware installation guide
Protect Against Electrostatic Discharge
WARNING:
Static electricity can harm delicate components inside your
system. To prevent static damage, discharge static electricity
from your body before you touch any of the electronic
components, such as the microprocessor. You can do so by
periodically touching an unpainted metal surface on the switch.

NETGEAR M5300 Series Specifications

General

Model	M5300 Series
Stackable	Yes
Form Factor	Rack-mountable
Layer	Layer 2/3
Power over Ethernet (PoE)	Available on some models
VLAN Support	Yes
Jumbo Frame Support	Yes
Operating Temperature	0°C to 50°C
Storage Temperature	-20°C to 70°C