NETGEAR M5300 Series User Manual

Technical Specifications
25
NETGEAR Managed Stackable Switch M5300 Series
Switch management • Port mirroring (TX, RX, Both)
• CPU port mirroring
• SNMP v1, v2c, v3
• RFC2819 RMON Groups 1, 2, 3, and 9, RFC1213 MIB II
• RFC1643 Ethernet Interface MIB
• RFC1493 Bridge MIB
• RFC2131 DHCP Client (and BootP)
• RFC2138 RADIUS Client
• Broadcast storm control
• Telnet sessions for management CPU (5)
• Ping support
• ARP support
• Private enterprise MIB
• Config File up/down load (X/Y/Z Modem, TFTP, SCP, SFTP, USB, HTTP/HTTPS)
• Runtime image download (X/Y/Z Modem, TFTP, SCP, SFTP, USB, HTTP/HTTPS)
• Command-line interface
• Web-based graphic user interface
• Simple Network Time Protocol (SNTP)
• Syslog
• SSLv3/TLSv1.0 Web Security
• Secured Shell (SSHv1, v2)
QoS • Mapping 802.1p, DSCP
• Strict Priority Scheduling
• Weighted Round Robin
• Weighted Random Early Detection (WRED)
• Ingress rate limiting
• Egress rate limiting (1 Kbps)
• DiffServ QoS
Security • IAS
• RADIUS
• TACACS+
• 802.1x
• MAC Filter
• Port Security
• Protected Port
• Private VLAN
• Storm Control
• DHCP Snooping
• IP Source Guard
• Dynamic ARP Inspection
• Captive Portal
• MAC ACL (inbound/outbound)
• IP ACL (inbound/outbound)
• IPv6 ACL (inbound/outbound)
Table 4. M5300 Series technical specifications (continued)

NETGEAR M5300 Series Specifications

General

Model	M5300 Series
Stackable	Yes
Form Factor	Rack-mountable
Layer	Layer 2/3
Power over Ethernet (PoE)	Available on some models
VLAN Support	Yes
Jumbo Frame Support	Yes
Operating Temperature	0°C to 50°C
Storage Temperature	-20°C to 70°C