The satellite label also displays the WiFi network name and password, the satellite’s
MAC address, and the satellite’s serial number. The following is an example of what the
satellite label might look like:
Figure 4. Satellite label
Connect your router
Power on your router and connect it to a modem.
Figure 5. Connect your router
To connect your router:
1.
Unplug your modem’s power, leaving the modem connected to the wall jack for
your Internet service.
If your modem uses a battery backup, remove the battery.
2. Plug in and turn on your modem.
If your modem uses a battery backup, put the battery back in.
3.
Connect your modem to the Internet port of your router with the Ethernet cable that
came with your router.
4. Connect the power adapter to your router and plug the power adapter into an outlet.
User Manual12Overview
Nighthawk Mesh WiFi 6 System
To Next Page
Loading...
Need help?
General
