Specify Network Settings
63
N300 WiFi Router
7. Within two minutes, go to the client device and use its WPS software to connect to the WiFi
network.
The WPS process automatically sets up your wireless computer with the network
password when it connects. The router WPS screen displays a confirmation message.
Specify Basic WiFi Settings
The router comes with preset security. This means that the WiFi network name (SSID),
network key (password), and security option (encryption protocol) are preset in the factory.
You can find the preset SSID and password on the router label. The preset SSID and
password are uniquely generated for every device to maximize your wireless security.
NETGEAR recommends that you do not change your preset security settings. If you change
your preset security settings, make a note of the new settings and store the note in a safe
place where you can easily find it.
If you use a wireless computer to change the SSID or other wireless security settings, you
are disconnected when you click the Apply button. To avoid this problem, use a computer with
a wired connection to access the router.
To specify basic wireless settings:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. In the address field of the web browser, enter www.routerlogin.net or
www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
