NETGEAR N300 WNR2000v5 - Use Router as Wireless Access Point

Specify Network Settings
67
N300 WiFi Router
Use the Router as a Wireless Access Point
You can set up the router to run as an access point (AP) on the same local network as
another router.
 To set up the router as an AP:
1. Use an Ethernet cable to connect the Internet port of this router to a LAN port in the
other router
.
Cable this port to a LAN port
on another router
2. Launch a web browser from a computer or wireless device that is connected to the network.
3. In the address field of the web browser
, enter www.routerlogin.net or
www.routerlogin.com.
A login screen displays.
4. Enter the router user name and password.
The user name is admin.
The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.