NETGEAR N600 WNDR3400v2 User Manual

110
A
A. Supplemental Information
This appendix provides factory default settings and technical specifications for the N600
Wireless Dual Band Router WNDR3400v2.
Factory Settings
You can return the router to its factory settings. Use the end of a paper clip or some other
similar object to press and hold the Restore Factory Settings button on the back of the
router for at least 5 seconds. The router resets and returns to the factory settings.
Your
device returns to the factory configuration settings shown in the following table.
Table 4. Factory default settings
Feature Default behavior
Router login User login URL www.routerlogin.com or www.routerlogin.net
User name (case-sensitive) admin
Login password (case-sensitive) password
Internet
connection
WAN MAC address Use default hardware address
WAN MTU size 1500
Port speed Autosensing
Local network
(LAN)
LAN IP 192.168.1.1
Subnet mask 255.255.255.0
DHCP server Enabled
DHCP range 192.168.1.2 to 192.168.1.254
Time zone Pacific time
Time zone daylight saving time Disabled
Allow a registrar to configure this
router
Enabled

NETGEAR N600 WNDR3400v2 Specifications

General

Model	WNDR3400v2
Category	Network Router
WiFi Technology	Dual Band
Wireless Standard	802.11n
Frequency Bands	2.4GHz and 5GHz
USB Port	1 x USB 2.0
Antenna	Internal
Humidity	90% maximum relative humidity, non-condensing
Ethernet Ports	4 x 10/100 Mbps
Security Features	WPA/WPA2, WEP
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 70°C