EasyManuals Logo

NETGEAR N600 WNDR3400v2 User Manual

NETGEAR N600 WNDR3400v2
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Hardware Setup
9
N600 Wireless Dual Band Router WNDR3400v2
Away from any large metal surfaces, such as a solid metal door or aluminum studs. Large
expanses of other materials such as glass, insulated walls, fish tanks, mirrors, brick, and
concrete can also affect your wireless signal.
To reduce interference when you use multiple access points, ensure that adjacent access
p
oints use different radio frequency channels. The recommended channel spacing between
adjacent access points is 5 channels (for example, use Channels 1 and 6, or 6 and 11).
Prepare the Router
To ensure proper heat dissipation and for router stability, it is important that you connect the
stand and place your router in an upright position.
To prepare your router for installation:
1. Care
fully peel off the protective film covering the top and sides of your router.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR N600 WNDR3400v2 and is the answer not in the manual?

NETGEAR N600 WNDR3400v2 Specifications

General IconGeneral
ModelWNDR3400v2
CategoryNetwork Router
WiFi TechnologyDual Band
Wireless Standard802.11n
Frequency Bands2.4GHz and 5GHz
USB Port1 x USB 2.0
AntennaInternal
Humidity90% maximum relative humidity, non-condensing
Ethernet Ports4 x 10/100 Mbps
Security FeaturesWPA/WPA2, WEP
Operating Temperature0°C to 40°C
Storage Temperature-20°C to 70°C

Related product manuals