EasyManuals Logo

NETGEAR N600 WNDR3400v2 User Manual

NETGEAR N600 WNDR3400v2
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
Hardware Setup
15
N600 Wireless Dual Band Router WNDR3400v2
Cable Your Router
The installation guide that came in the box has a cabling diagram on the first page.
Verify the Cabling
Verify that your router is cabled correctly by checking the router LEDs. Turn on the router by
pressing the On/Off button on the back.
The Power/Test LED is green when the router is turned on.
The LAN ports are green for each Windows computer cabled to the router by an
Ethernet cable.
2.4
GHz
5
GHz
The Wireless LEDs are on.
The Internet LED is lit. If it is not, make sure that the Ethernet cable is securely
attached to the router Internet port and the modem, and that the modem is powered on.
Verify that the LAN
LEDs (1 through 4) are lit for any computers cabled to the router by
an Ethernet cable.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR N600 WNDR3400v2 and is the answer not in the manual?

NETGEAR N600 WNDR3400v2 Specifications

General IconGeneral
ModelWNDR3400v2
CategoryNetwork Router
WiFi TechnologyDual Band
Wireless Standard802.11n
Frequency Bands2.4GHz and 5GHz
USB Port1 x USB 2.0
AntennaInternal
Humidity90% maximum relative humidity, non-condensing
Ethernet Ports4 x 10/100 Mbps
Security FeaturesWPA/WPA2, WEP
Operating Temperature0°C to 40°C
Storage Temperature-20°C to 70°C

Related product manuals