NETGEAR N600 WNDR3400v2

genie Advanced Home
37
N600 Wireless Dual Band Router WNDR3400v2
Within two minutes, go to the client device and use its WPS software to join the
network without entering a password.
The router attempts to add the WPS-capable device. The WPS LED
on the top of
the router blinks green. When the router est
ablishes a WPS connection, the LED is solid
green, and the router WPS screen displays a confirmation message.
4. Repe
at Step 2 and Step 3 to add another WPS client to your network.
Setup Menu
Select Advanced > Setup to display the Setup menu. The following selections are available:
• Internet Setup.
This is a shortcut to the same Internet Setup screen that you can access
from the dashboard on the Basic Home screen. See Internet Setup on p
age 23.
• W
ireless Setup. This is a shortcut to the same Wireless Setup screen that you can
access from the dashboard on the Basic Home screen. See Basic Wireless Settings on
page 27.
• Guest Network. This is a shortcut to th
e same Guest Network screen that you can
access from the dashboard on the Basic Home screen. See Guest Networks on p
age 31.
• W
AN Setup. Internet (WAN) setup. See WAN Setup on page 38.
• LAN Setup. Lo
cal area network (LAN) setup. See LAN Setup on page 41.
• QoS Setup. Qu
ality of Service (QoS) setup. See Quality of Service (QoS) Setup on
page 44.