NETGEAR N600 WNDR3400v2 User Manual

Hardware Setup
12
N600 Wireless Dual Band Router WNDR3400v2
LAN ports
1–4
• Solid green. The LAN port has detected a 1,000 Mbps link with an attached device.
• Blinking green. Data is being sent at 1,000 Mbps.
• So
lid amber. The LAN port has detected a 10 Mbps link with an attached device.
• Bl
inking amber. Data is being sent at 100 Mbps or 10 Mbps.
• Off. No
link is detected on this port.
5 GHz
5
GHz
• Solid blue. The wireless radio is operating.
• Bli
nking blue. Data is being sent or received over the wireless network.
• Off. The wireless radio is off.
2.4 GHz
2.4
GHz
• Solid blue. The wireless radio is operating.
• Bli
nking blue. Data is being sent or received over the wireless network.
• Off. The wireless radio is off.
Internet
• Solid amber. The IP address has not been acquired.
• Solid green. An IP address was received; ready to transmit data.
• Blin
king green. Data is being sent to or received from the Internet.
• Off. No
Ethernet cable is connected between the router and the modem.
Power/Test • Solid amber. The unit is starting up after being powered on.
• So
lid green. The power is on and the router is ready.
• Bl
inking amber. A firmware update is in progress.
• Blinking green. The firmware is corrupt.
• Off. Po
wer is not supplied to the router.
WPS
• Solid green. Indicates that wireless security is enabled.
• Blin
king green. The router is using WPS to add a wireless device to the network.
• Off. No
WPS connection exists.
Table 1. Front panel LED descriptions (continued)
LED Description

NETGEAR N600 WNDR3400v2 Specifications

General

Model	WNDR3400v2
Category	Network Router
WiFi Technology	Dual Band
Wireless Standard	802.11n
Frequency Bands	2.4GHz and 5GHz
USB Port	1 x USB 2.0
Antenna	Internal
Humidity	90% maximum relative humidity, non-condensing
Ethernet Ports	4 x 10/100 Mbps
Security Features	WPA/WPA2, WEP
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 70°C