NETGEAR Nighthawk 5G Mobile Hotspot Pro

To log in to the mobile router from the NETGEAR Mobile app:
1. On your smartphone, connect to the mobile hotspot’s WiFi network.
2. Launch the NETGEAR Mobile app.
You might be prompted to enter the admin password. During setup, you were
prompted to change this password (the default password is attadmin).
3.
If prompted, enter the admin password.
The app displays the following information:
•
Notifications
•
Data usage as provided by your carrier
•
Your cellular and WiFi signals and battery
•
Current WiFi band (swipeable)
•
WiFi name and password
•
Connected devices.
4. Swipe down.
The dashboard displays the icons shown in the following table.
DescriptionIconDescriptionIcon
Storage (not supported)WiFi
SecurityOffloading
Network MapNumber of connected
devices
User Manual19Connect to the Mobile Hotspot
Nighthawk 5G Mobile Hotspot Pro