NETGEAR Nighthawk 5G Mobile Hotspot Pro

Set Up Access Control From a Web Browser
To set up access control:
1. From a computer that is connected to your network, launch a web browser.
2.
Enter http://attwifimanager or http://192.168.1.1.
A login page displays.
3. Enter the administrator login password.
The password is case-sensitive.
The dashboard displays.
4. Select SETTINGS > Security > Access Control.
The Access Control page displays.
5. Select the Enable check box.
6. In the Filter Type menu, select White List or Black List.
Depending on your selection, the page displays an Allow List or a Block List.
7. To add a device to the list, click the ADD button and select the device.
The device is added to the list.
8.
To remove a device from the list, select the device and then click the DELETE button.
The device is removed from the list.
Set Up Client Privacy
You can set up client privacy, to isolate all client data from the data of other clients.
To set up client privacy
1. From a computer that is connected to your network, launch a web browser.
2.
Enter http://attwifimanager or http://192.168.1.1.
A login page displays.
3. Enter the administrator login password.
The password is case-sensitive.
The dashboard displays.
4. Select SETTINGS > Mobile Router Setup.
The Settings page displays.
User Manual39Control Internet Access
Nighthawk 5G Mobile Hotspot Pro