NETGEAR Nighthawk 5G Mobile Hotspot Pro

Quick Charge the Battery
The mobile hotspot supports Quick Charge 2.0 technology. You can charge the mobile
hotspot battery with a Quick Charge–certified power adapter, which charges the battery
up to 75 percent faster than regular power adapters by increasing the charging power.
The current rating on the Quick Charge–certified power adapter must be greater than
1.5A.
Recharge the Battery From a Wall Socket
To recharge the battery from a wall socket:
1.
Attach one end of the micro USB cable to the connector on the right on the mobile
hotspot and attach the other end to the wall charger (included).
2. Plug the wall charger into a wall socket.
The Battery icon on the LCD indicates that the battery is charging.
Note: The battery continues to charge when the mobile hotspot is powered off.
If your battery does not charge, check the following:
•
Is the mobile hotspot hot? If you are in a low-coverage area, are transferring a
lot of data, or left the mobile hotspot in a hot location, the internal temperature
of the mobile hotspot can rise above 45°C. In these conditions, the rate of battery
charging is reduced, or at 50ºC or above the battery cannot be charged due to
safety limits with lithium-ion battery technology.
•
Make sure that the USB cable and the AC wall charger are connected securely
and are working correctly.
•
If the wall socket is controlled by a switch, make sure that the switch is in the
power-on position.
User Manual24Manage Battery Usage and
Charging
Nighthawk 5G Mobile Hotspot Pro