NETGEAR Nighthawk 5G Mobile Hotspot Pro

4. Select SETTINGS > Advanced Settings > Cellular.
The Network Settings page displays.
5. Clear the Data check box.
6. Click the Apply button.
Your settings are saved.
The LCD is not lit. How do I know if the
mobile hotspot is still powered on?
The LCD dims to save energy. The LED continues to blink slowly to indicate that the
mobile hotspot is still powered on. To wake the LCD, tap the Power button.
How do I find my computer’s IP address?
The steps for finding your computer’s IP address depend on the operating system. If
your device runs an operating system not listed here, see the appropriate operating
system documentation.
How do I find my computer’s IP address on a Windows 7,
Windows 10, or Windows Vista device?
To find the IP address on a Windows 7, Windows 10, or Windows Vista device:
1. Open the command prompt window:
a. Select Start > Run.
b. Enter cmd or command and click the OK button.
2.
At the command prompt, enter ipconfig and press Enter.
3.
Write down the IP address for the entry that relates to the wireless network
connection.
The IP address might be listed under IPv4 Address or something similar.
User Manual80Frequently Asked Questions
Nighthawk 5G Mobile Hotspot Pro