NETGEAR Nighthawk AC1900 R7000 User Manual

3
Make sure that your modem is turned off and is cabled only to the
wall jack for your Internet service.
3. Connect your modem.
a. Plug in, then turn on your modem. (Replace the batteries if
you removed them previously.)
b. With the yellow Ethernet cable that came with the router,
connect your modem to the Internet port of your router.
4. Add power to the router.
a. Connect the power adapter to the router, and plug the power
adapter into an outlet.
Router
Modem
On/Off

NETGEAR Nighthawk AC1900 R7000 Specifications

General

WiFi Performance	AC1900 (600 + 1300 Mbps)
WiFi Range	Very large homes
Beamforming	Yes
Antennas	3 external antennas
Dynamic QoS	Yes
VPN Support	Yes
Guest Network	Yes
Parental Controls	Yes
Dimensions	11.22 x 7.26 x 1.97 in (285 x 184.5 x 50 mm)
WiFi Technology	802.11ac
Processor	1GHz Dual Core
Ethernet Ports	5 (1 WAN & 4 LAN) Gigabit Ethernet ports
USB Ports	1 x USB 3.0, 1 x USB 2.0
Memory	128 MB Flash and 256 MB RAM
Security	Double Firewall Protection (SPI and NAT)
Weight	1.65 lb (750 g)