NETGEAR Nighthawk AX6 User Manual

To erase the settings:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Administration > Backup Settings.
The Backup Settings page displays.
5. Click the Erase button.
The configuration is reset to factory default settings. When the reset is complete,
the router restarts. This process takes about two minutes.
WARNING: To avoid the risk of corrupting the firmware, do not interrupt the reset.
For example, do not close the browser, click a link, or load a new page. Do not turn
off the router. Wait until the router finishes restarting.
User Manual107Manage Your Router
Nighthawk AX6 6-Stream AX5400 WiFi Router

NETGEAR Nighthawk AX6 Specifications

General

WiFi Range	Up to 2, 500 sq. ft.
Number of Devices	Up to 25
Beamforming	Yes
MU-MIMO	Yes
Model	RAX50
OFDMA	Yes
WiFi Technology	802.11ax
Processor	1.5GHz
Ethernet Ports	5 (1 WAN, 4 LAN)
USB Ports	1 x USB 3.0
Security	WPA3
Wi-Fi Bands	Dual-Band (2.4GHz + 5GHz)
Antenna	4 external antennas