EasyManuals Logo

NETGEAR Nighthawk AX6 User Manual

NETGEAR Nighthawk AX6
159 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers.
Your ISP automatically assigns this address.
Use These DNS Servers. If you know that your ISP requires specific servers, select
this option. Enter the IP address of your ISP’s primary DNS server. If a secondary
DNS server address is available, enter it also.
7. Select an IP Address Assignment radio button:
Use DHCP Server. This method passes more information to LAN devices but
some IPv6 systems might not support the DHCPv6 client function.
Auto Config. This is the default setting.
This setting specifies how the router assigns IPv6 addresses to the devices on your
home network (the LAN).
8.
(Optional) Select the Use This Interface ID check box and specify the interface ID
that you want to be used for the IPv6 address of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC
address.
9. Click the Apply button.
Your settings are saved.
Manage the MTU size
The maximum transmission unit (MTU) is the largest data packet a network device
transmits.
MTU concepts
When one network device communicates across the Internet with another, the data
packets travel through many devices along the way. If a device in the data path uses a
lower maximum transmission unit (MTU) setting than the other devices, the data packets
must be split or “fragmented” to accommodate the device with the smallest MTU.
The best MTU setting for NETGEAR equipment is often the default value. In some
situations, changing the value fixes one problem but causes another. Leave the MTU
unchanged unless one of these situations occurs:
You experience problems connecting to your Internet service, and the technical
support of either the Internet service provider (ISP) or NETGEAR recommends
changing the MTU setting.
For example, if a secure website does not open, or displays only part of a web page,
you might need to change the MTU.
User Manual38Specify Your Internet Settings
Nighthawk AX6 6-Stream AX5400 WiFi Router

Table of Contents

Other manuals for NETGEAR Nighthawk AX6

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR Nighthawk AX6 and is the answer not in the manual?

NETGEAR Nighthawk AX6 Specifications

General IconGeneral
WiFi RangeUp to 2, 500 sq. ft.
Number of DevicesUp to 25
BeamformingYes
MU-MIMOYes
ModelRAX50
OFDMAYes
WiFi Technology802.11ax
Processor1.5GHz
Ethernet Ports5 (1 WAN, 4 LAN)
USB Ports1 x USB 3.0
SecurityWPA3
Wi-Fi BandsDual-Band (2.4GHz + 5GHz)
Antenna4 external antennas

Related product manuals